Advanced accessories for KLM 60 and LM 300
Inner thread measurement modules and adapters, as well as PC systems and software to extend the range of application and make measurement result acquisition and processing more precise.Legend:
1 – Applicable to KLM 60;
2 – Applicable to LM 300;
3 – Applicable with adapter plate 76 4207 312 25 at LM 300
Advanced Accessory | Order No. | Application |
Internal thread measuring device Laminated spring parallelogram with inductive probe | 76 4206 272 20 | 1 |
Internal thread measuring device Laminated spring parallelogram with | 76 4207 272 20 | 2 |
Adapter plate for accessories For use of KLM accessories on the | 76 4207 312 25 | 2 |
Floating table Y-axis To check plug gauges and pin gauges, in Y-axis | 76 4206 259 25 | 1 / 3 |
Quick clamping table For fast clamping of small thread and | 76 4206 925 25 | 1 / 3 |
Prism stage For measurement of cylindrical specimens | 76 4205 011 25 | 1 / 3 |
Tunnel table For probing from below for rings, gauges and | 76 4206 250 25 | 1 / 3 |
Center support To check mandrels and cylindrical | 76 4205 012 25 | 1 / 3 |
Center support pivotable and movable To test plug gage, thread gage with | 76 4206 926 25 | 1 |
Center support movable To test plug gage, thread gage with | 76 4206 929 25 | 1 |
Center support pivotable and movable To test plug gage, thread gage with | 76 4207 494 25 | 2 |
Center support movable To test plug gage, thread gage with floating Y-axis, | 76 4207 929 25 | 2 |
Slot table For series measurements with prepositioned fixes | 76 4205 016 25 | 1 / 3 |
Reducing bushing To check dial gauges and measuring | 76 4206 253 25 | 1 |
Extension probe 186 mm Long extension probe to attach the | 76 4206 290 10 | 1 |
Union nut | 76 4206 183 10 | 1 |
Plate probe Ø 6 mm for internal measuring For punctures in holes in combination | 76 4206 601 10 | 1 / 2 |
Foot switch Connection to PU 36 for measured value transfer | 76 1610 025 25 | 1 / 2 |
Additional weight Clamped weight to increase the gauging | 76 4206 256 25 | 1 |
Mount for dial gauges Reducing bushing to mount dial | 76 4207 520 25 | 2 |
Set for snap gauges and 2 point internal Universal clamping device for snap gauges | 76 4207 431 25 | 2 |
Quick set for threaded rings For quick measurement of threaded | 76 4207 433 25 | 2 |
Internal measuring bracket long 135 mm useful length and 36 mm useful | 76 4207 439 25 | 2 |
Internal measuring device for small drillholes For small drillholes as of 0.9 mm incl. measuring | 76 4206 331 25 | 1 |
Internal measuring device for small drillholes For small drillholes as of 0.9 mm incl. measuring | 76 4207 530 25 | 2 |
Ring support To support large thread and ring gage up | 76 4207 532 25 | 2 |
Thread measuring wires in holder (fi xing bore Ø 8 mm) Wire diameter 21 part as per “Zeissseries” | on request | 1 / 2 |
Pin measuring table Supporting prism for fast and economic checking | 76 4206 950 25 | 1 / 3 |
Measuring attachment measuring edge 8 x 0,5 mm For pin gage measurements with pin measuring table | 76 3811 676 24 | 1 / 3 |