Skip to main content

Accessories horizontal length measuring systems

Internal thread measuring device
Laminated spring parallelogram with inductive probe and position indicator LEDs
Adapter plate for accessories
For use of KLM accessories on the measuring table of the LM 300/600
Floating table Y-axis
To check plug gauges and pin gauges, in Y-axis floating
Quick clamping table
For fast clamping of small thread and ring gauges, incl. dial gauge holders
Prism stage
For measurement of cylindrical specimens
Tunnel table
For probing from below for rings, gauges and drillholes
Center support
To check mandrels and cylindrical parts with centering
Center support pivotable and movable
To test plug gage, thread gage with floating Y-axis and rotating Z-axis
Center support movable
To test plug gage, thread gage with floating Y-axis
Slot table
For series measurements with prepositioned fixes
Reducing bushing
To check dial gauges and measuring sensors with 8 mm shaft, inserted at the anvil with clamping function
Extension probe 186 mm
Long extension probe to attach the sleeve for probing the measuring bolt when checking the dial gauges
Plate probe Ø 6 mm for internal measuring bracket for small drill holes
For punctures in holes in combination with inner measuring brackets
Foot switch
Connection to PU 36 for measured value transfer
Additional weight
Clamped weight to increase the gauging force up to 2.5 N
Mount for dial gauges
Reducing bushing to mount dial gauges and probes; fitted in the anvil
Set for snap gauges and 2 point internal measuring devices
Universal clamping device for snap gauges, external micrometers, 2 point precision micrometers
Quick set for threaded rings
For quick measurement of threaded rings and ring gage in vertical position, with X-Y floating table, measuring yoke with interchangeable ball measuring inserts; precision vice
Internal measuring bracket long
135 mm useful length and 36 mm useful height for deep measurements in the X-axis, with ruby ball 8 mm
Internal measuring device for small drillholes
For small drillholes as of 0,9 mm, incl. measuring yoke with zero indicator probe
Ring support
To support large thread and ring gage up to inner dimensions of 350 mm
Thread measuring wires in holder (fixing bore Ø 8 mm)
Wire diameter 21 part as per “Zeiss-Series”
Pin measuring table
Supporting prism for fast and economic checking of pin gage and cylindrical specimens with measuring inserts with cutting edges
Measuring attachment measuring edge 8 x 0.5 mm
For pin gage measurements with pin measuring table